How To Build A Electric Generator

Official Magniwork Website
Click Here


How To Build A Electric Generator

An electric generator is based on the principle that a magnetic field's deviation from a loop of wire generates electric current. Therefore, electric generators are aptly called energy converters since they convert heat or kinetic energy into electrical energy. Nowadays, many people have delved into this simple and yet powerful concept of how to build a electric generator to the extent that inventors emerged from different parts of the globe with their very own systems.

With many people now interested in lowering their electric bills, some of them may have been scouring the internet for how-to-do and how-to-build instructional materials with regards to electric generators. But first thing you need to understand is that this project concerns electricity and it should be dealt with utmost care and caution.


* Below are the simplest steps on how to build a electric generator based on its basic principle:

(1) Determine your source of energy

First thing to do is to determine your source of energy that will be converted into electricity. It is advisable to use a source that has a rotating axle such as a water wheel, windmill or even stationery bike.

(2) Coil a good length of wire

By coiling a substantial length of wire, you'll be able to have a good amount of loop with two accessible ends. More electricity can be generated from more loops, so make sure that you have enough wire to produce more of both.

(3) Connecting your wire to your energy source

Rotate the wire ends and be careful not to twist the connecting wires. Connect one of the wire ends to the rotating axle and the other end to conducting brush which is in constant contact with a second conductor.

(4) Reinforce the wire loop with a sturdy material

Ensure that the moving parts of your energy source do not interfere with the wire loop by reinforcing and supporting it with a sturdy plastic or any non-conductive material.

(5) Arrange the magnets around the wire loop

Set up the magnets properly to ensure that the wire loop can freely revolve between them. The magnets should be positioned properly [north end of one magnet meets the south end of the other] in order to maximize field strength.

(6) Attach your conductors to a circuit, device or battery as necessary

Your energy source's conductors should be attached to a battery, a device or a circuit. You may need the help of an electrician if you're not sure about this step since it needs mechanical and electrical know-how.

(7) Activate your energy source

Whatever it is that you are using as an energy source, you need to turn it on or activate it. If you are using a stationary bike, windmill or water wheel, they need to move in order to generate energy.


Though the principles are simple and many folks can attest that they were able to build their own electric generators at home, it is important that you take note of the following points:

- This example of an electronic generator typically generates alternating current [AC] electricity which has a frequency that is determined by the rate of the revolution of its wire loop.

- Ensure that the voltage level as well as the need to design an interface [circuitry] is met first before you connect your electric generator to any device or battery.

- The amount of electric voltage that this type of electric generator can produce will depend on such factors as magnetic field strength; size, speed and number of loop revolution; and quality of electrical connections.

- You need to make sure that all of your connections do not form a short circuit. The challenge is to keep the loop's ends as your only electrical connection.

- Voltage will depend on how your generator was built. Even if you are only making a prototype or a small generator, caution and safety are always necessary.


You may be wondering how to build a electric generator once you find out that there are alternative solutions out there to the ever-changing prices of electricity. Well, look no further and check out Magniwork. This energy-generation system is captures the concept of converting magnetic energy into electricity which can be used on a small-scale, for the home or a small establishment. Since magnetic energy is an abundant and powerful energy source, it provides more energy that it can actually consume. You are sure to benefit from a generator based on the Magniwork system because it can provide you with free electricity at very affordable investment.

Official Magniwork Website
Click Here